Certificates, report numbers and tested values.
Everything on this page can be independently verified against the issuing body's register. We publish the numbers because tender reviewers check them.
Two certification schemes cover our export systems: AS 2047:2014 for Australia and New Zealand through CSi, and a CSA Group certificate of compliance against the North American harmonized standard for Canada. Both were issued on full-size test specimens by accredited third-party laboratories, and both can be verified on the issuing body's public register.
AS 2047:2014 — Australia & New Zealand
Certification Solutions International
CSi PAS-Mark scheme, Type 5 product certification, accredited by JASANZ under ISO/IEC 17065.
7724
Certificate 7724-2026-02-C1-R0, issued 17 February 2026, valid to 16 February 2027, annual review due 20 January 2027.
105 series door and window
Outward-opening swing door and hand-crank awning window, tested at 1936 × 2790 mm and 2400 × 2200 mm.
| Product | Serviceability wind pressure (SLS) | Ultimate limit state (ULS) | Water penetration resistance | Test report |
|---|---|---|---|---|
| 105 Series outward-opening swing door | 1600 Pa | 5300 Pa | 450 Pa | EET-2025QCFS3-0028(E) |
| 105 Series hand-crank awning window | 2500 Pa | 6000 Pa | 600 Pa | EET-2025QCFS3-0038(E) |
Air infiltration at ±75 Pa: 0.92 / 0.96 L/s·m² for the swing door and 0.68 / 0.77 L/s·m² for the awning window. Compliance labelling carries Marking ID 7724. Verify at register.jasanz.org.
CSA Group — Canada
80250569
Certificate of compliance, master contract 305686, issued 19 March 2026.
AAMA/WDMA/CSA 101/I.S.2/A440-17
With supplement A440S1:19 and thermal standard CSA A440.2:19.
SCC accredited
Standards Council of Canada, ISO/IEC 17065.
| Product | Type | Test size | Performance class | Design pressure | Water |
|---|---|---|---|---|---|
| EB-120 side-press sliding window | HS | 2200 × 2100 mm | LC-PG40 | ±1920 Pa | 720 Pa |
| EB-86 casement + fixed combination | C/FW | 2201 × 1500 mm | LC-PG45 | ±2160 Pa | 720 Pa |
| EB-68A folding door | FLD | 2200 × 2100 mm | LC-PG35 | ±1680 Pa | 290 Pa |
ISO and material certification
Alongside the two structural schemes, we hold ISO 9001 quality management system certification, China green building material certification and the enterprise standard leader certificate for high-performance aluminium exterior windows.
- Lead drafting organisation for the group standard on high-performance thermal-insulated, ultra-airtight doors and windows
- National High-Tech Enterprise status, with more than 200 authorised patents and copyright registrations
- In-house laboratory for wind pressure, thermal, acoustic, air tightness and water tightness testing
- More than 300 professional tests completed annually
How to use these certificates in a tender
Check that the specification falls inside the certified product range. Certificates cover specific systems, sizes and glazing combinations, not an entire product family.
Request the full document pack: certificate, product compliance schedule and test reports.
Verify the certificate number against the issuing body's public register on the date of submission, and note the expiry date in your file.
Certificate validity changes over time. Always confirm the current status with us before a tender deadline rather than relying on a downloaded copy.
Need the full certificate pack for a tender?
Tell us the project country and we send the applicable documents.